File

Presets allow all characteristics of the monitor to be saved to a user defined file. The preset can be called at any time or set to automatically load each time the computer is restarted.  Presets provide greater flexibility and can be based on multi-user configurations, content specific material, application requirements, and changes in the work environment.

Factory Preset

In addition to the user definable Presets, EzTune has a Factory Default Preset. Loading this preset will reset the display to the recommended factory settings. The factory preset provides an easy way to restore the image if the monitor is poorly adjusted.

NOTE: The Factory preset can not be deleted or overwritten.

How to manage Presets.

To access the preset control pane, select the File tab.

Enter Preset Name - Typing a descriptive name of the file in the Enter Preset Name box and clicking the Save button will save the current settings as a Preset. After the Save button is clicked, this new Preset will appear in the drop-down menu below.

Select Preset Name - The drop down menu displays the list of available Presets. Holding down the arrow activates the drop-down menu. To activate a Preset, select the desired Preset from this menu. It will appear in both text boxes. Next click the Use Preset button.

Make this Preset the default - When checking this box, the Preset shown in the Enter Preset name box is set as the default. Once selected, the preset will automatically load when the computer is restarted or when logging on as a user. To disable, uncheck the box when the default preset is shown in the Enter Preset Name box.

Delete - Deletes the visible preset in the drop down menu. Once deleted, the preset is lost.

Save - Saves the Preset. To enter in a new file name, highlight the file name in the active menu area type a new name. This will add the new file name to the drop down list and will NOT overwrite the previous file name.

Use Preset- Loads the selected preset

How to Save Presets in Wizard Mode

To add a Preset

1. Launch EzTune
2. Select the Wizard Tab
3. Select the Start Wizard button
4. Proceed through the Wizard
5. Once complete, the Preset pane will appear.
6. Highlight the name in the menu box and enter in a new name. Leaving the current name visible will overwrite the file.
7. Select OK

How to Save Presets in OSD Mode

To add a Preset

1. Launch EzTune
2. Make adjustments to any of the monitor controls
3. Select the File tab
4. Highlight the name in the menu box and enter in a new name. Leaving the current name visible will overwrite the file.
5. Select Save

How to Load Presets

There are two ways to load a saved preset; from within EzTune from the File Tab or from the Context Sensitive menu.

To load a EzTune preset from within EzTune

1. Launch EzTune
2. Select the File tab
3. Select the file name from the drop down menu in the Preset drop down menu
4. Select Use Preset

To load a EzTune preset from the Context Sensitive Menu

1. Right Click on any vacant area of the desktop
2. Select the Preset name from the hierarchical menu

How to Delete Presets

To Delete a EzTune preset from within EzTune

1. Launch EzTune
2. Select the File tab
3. Select the file name from the drop down menu in the Preset drop down menu
4. Select Delete

NOTE: Once a preset has been deleted it can not be restored.