The C6 HDR5000 Colorimeter is field-upgradeable with Calman, meaning that supported display technologies are automatically updated when the device connects with the software. 

The C6 HDR5000 is designed and specified to measure luminance at a ¹guaranteed range up to 5000 cd/m²

Features

  • Supports many display technologies including QD-OLED, W-RGB OLED, LCD LED, and front projection.
  • Field upgradeable for new display technologies and calibration tables with spectral characterization technology.
  • Advanced automatic low and high luminance handling to optimize accuracy and measurement speed.
  • A guaranteed measurement range up to 5000 cd/m².
  • Advanced light and color dichroic glass filters provide spectral accuracy and environmental stability over time.
  • Environmentally-sealed optics and sensors for increased lifespan.
  • Improved cable durability and strain relief.

Miscellaneous

  • Weight: 130g
  • Dimensions: 2.5×1.5×2.5 inches/64x38x65mm
  • Cable length: 6 feet/1,830mm

Included Parts

  • Portrait Displays C6 HDR5000 Colorimeter
  • One-Year Limited Warranty

Required Software Version

  • Calman Version 5.15.6 or newer 
  • No external drivers are needed; the meter is configured as a Windows HID device.

Note: The C6 HD5000 Meter can only be used with Calman. 

Meter Positioning

Flat Panels and Rear Projectors

The C6 HDR5000 should be positioned with the face of the meter completely flush and in contact with the center of a flat panel or rear projector screen, in this position, the foam padding will block ambient light leakage. The cable counterweight can be slid up and down the cable and draped over the top of the display to assist with this.

Front Projectors

The C6 HDR5000 has a tripod mount for use in non-contact mode, to measure front projector screens. Place the meter about three feet (1 meter) back from the screen. And, in a position where the measurements will not be obscured by the meter’s shadow. 

 

Calman Connection Procedure

  1. Plug the C6 HDR5000 into a USB port. The built-in Windows HID driver will be installed automatically.
  2. From the Meter Settings panel, click Find Meter.
  3. On the Find Meters popup dialog:
    • Leave Com Port set to default.
    • Select “All meters not listed below”
    • Click Search.

Meter Mode (Target Display Type)

¹Learn More.